Household Appliances Fast Repair on the Day of Request
Call a master
with web app request.
Quick to reply and book, Adam fixed my fridge fast. The service fee went towards the repair cost!
Joshua H.
Needham
Boston masters fixed my GE dishwasher on the same day. The technician was great — quick and clear.
Jackie L.
East Boston
My oven bakes again, thanks to their quality work and super friendly technician. Peace of mind reigns once more!
Kathleen G.
Watertown
Repair at Affordable Price
82% repairs occur immediately on the first visit.
You care about the environment by choosing the repair rather than buying new appliances
Did your equipment break down?
Apply online and receive 20% discount on your first order.
and we’ll call you back within 3 minutes.
Craftsman's Work Control
Education
All craftsmen have been trained to repair appliances.
Control
Specialists provide a full report on each repair performed.
Feedback
We call up all customers and collect handyman performance evaluations.
Cooperation Procedure
Application form
Call a master
The specialist goes to the call at the appointed time interval.
You negotiate the cost of the work with the master, and he starts the repairs.
Payment and issuance for guarantees.
Testimonials
I booked a service call after the microwave began to spark inside. The repairman could make it right on the day of the call. After disassembling the microwave, he found the reason in a burned out magnetron cap and replaced it. The microwave stared working as usual. Thanks a lot! And the cost was reasonable.
The repairman came to fix the dishwasher. It threw an error message in a draining mode. The breakdown was fixed in two hours. The repairman cleaned the pump and filters. Ultimately we had to clean the entire hydraulic system. Basically the error was caused by a blockage. After the repair the dishwasher works properly.
The washing machine didn't operate in a spin mode. The repairman came at set time. It's been a month since the repair, and everything is working ок.
The dryer stopped working at our hotel, so we made an equipment repair request in this company. The serviceman arrived quite quickly. He brought a suitcase of spare parts and completed the repair in 2 hours.
The serviceman was called because of the dryer malfunction. After leaving a request on the website, we received a callback and discussed all the details. Btw, the serviceman arrived within three hours. He was experienced and quickly dealt with the malfunction. Btw, the repair price was quite low for us.
The washing machine has stopped working. No reaction on the "start" button. I called the serviceman from the company. He arrived in a couple of hours. The diagnostic showed that the drum bearing was out of order. After replacement everything works perfectly. I recommend.
I applied for a gas stove repair. The repairman arrived at the specified time. The process took about 40 minutes, he checked everything thoroughly. I would like to note a conscientious attitude to work. So I have no complaints.
The dishwasher began to leak and did not drain the water. I told the employee about the breakdown on the phone and we set a visit time. The repairman arrived in two hours and found the reason for the pump malfunction. He cleaned it and everything began to operate. Thanks
What Neighborhood
We Work in
We are providing exceptional appliance repair services in Greater Boston, from Beacon Hill to Natick and everywhere in between. Unlike big corporate giants with endless red tape, where your request can get stuck or lost, we pride ourselves on offering personalized, human-centered service. Our promise of same-day, reliable service has cemented our reputation as the go-to option for countless households and businesses across Greater Boston. When it comes to expert appliance repair and maintenance, the team you can rely on is right here in the heart of Boston.
We also work in the following non-populated areas.
Needham
Newton
Chestnut Hill
Dedham
Wellesley
Weston
Natick
Brookline
Watertown
Needham
Newton
Chestnut Hill
Dedham
Wellesley
Weston
Natick
Brookline
Watertown
Frequent breakdowns
Error code on display
Indication: The error code is displayed on the control panel, while the machine is working or not.
Cause: Most likely the problem is in the electronic module.
The washing machine does not drain
Indication: During washing or spinning, the machine does not start the next stage and does not drain the water from the drum.
Cause: Faulty drain pump.
The washing machine does not turn on
Indication: The door closes, the machine does not respond to pressing the buttons and does not start the program.
Cause: The power cord is most likely faulty.
The washing machine does not spin
Indication: During spinning the machine turns the drum too slow and does not squeeze clothes out.
Cause: Electric motor failure.
The washing machine does not spin
Indication: During spinning the machine turns the drum too slow and does not squeeze clothes out.
Cause: Electric motor failure.
The washing machine does not take water
Indication: The washing stage does not start, no water enters the drum.
Cause: the filling hose malfunction.
The washing machine is leaking
Indication: A puddle under the washing machine, and a trickle stretches from the hatch during washing.
Cause: Wear of the manhole cuff.
The washing machine is flashing
Indication: A code is displayed on the screen of the washing machine or an error indicator is working.
Cause: There is a problem in the electronic module.
The washing machine does not spin
Indication: The program is running, but the drum does not spin after filling with water.
Cause: Wear of the drive belt.
The washing machine broke down
Indication: The washing machine does not respond to pressing the buttons, there is no indication.
Cause: of the electronic module malfunction.
The washing machine is humming
Indication: When draining, the machine makes a noise, the water drains with difficulty.
Cause: the drain pump malfunction.
The washing machine does not wash
Indication: The washing program does not start, the display is working.
Cause: the filling hose malfunction.
The dryer does not dry
Indication: by the end of the program, the laundry in the machine remains wet, the warming up process does not occur.
Cause: the heating element malfunction.
The dryer is not working
Indication: The machine does not respond to the buttons, does not turn on, there is no external damage.
Cause: the power cord malfunction.
The dryer does not dry the laundry
Indication: The temperature is not high enough to dry the laundry. The laundry remains wet.
Cause: The temperature sensor is defective.
The dryer does not turn on
Indication: The indicators are lit, the program is selected, the protection is activated.
Cause: the hatch mounting malfunction.
The dryer turns off
Indication: When selecting a program and starting work, the machine turns itself off.
Cause: the heating element malfunction.
The dryer does not heat
Indication: The air in the machine remains cold, which leaves the laundry completely wet.
Cause: the heating element malfunction.
The drum does not spin in the dryer
Indication: The drum has stopped rotating during the programs, it can be manually activated and spinned.
Cause: The drive belt is defective.
The dryer does not turn the drum
Indication: The screen and buttons are working, the drum does not move when the program is selected, no error appears.
Cause: The electronic module is defective.
Why is the dryer shuts down ahead of time
Indication: The machine starts working, then turns off after a few minutes.
Cause: The electronic module is defective.
The drying machine is leaking
Indication: When draining water, there is a leak under the machine and the noise.
Cause: The drain pump is defective.
The dryer does not start
Indication: The program process is not selected and does not start, the moisture tank is full.
Cause: The capacitor is defective.
The dryer is leaking
Indication: There is a leak at the bottom of the machine after shaking during operation, water is not collected in the hopper.
Cause: the pipes sealing malfunction.
The dishwasher is not working
Indication: There are no Indications of connection, there is no light indication.
Cause: the front panel malfunction.
The dishwasher does not drain the water
Indication: After a full session, the water does not drain and remains in the compartment with the dishes, dirty water stagnates.
Cause: the drain pump malfunction.
The dishwasher is flashing
Indication: The "tap" indicator is flashing on the front panel.
Cause: the filling hose malfunction.
Plaque in the dishwasher
Indication: The appearance of a white or yellowish plaque on the inner walls, as well as on the dishes.
Cause: Aquasensor failure.
The dishwasher does not take water
Indication: When the program starts, there is no water intake, the indicator on the panel is lit.
Cause: the hatch mounting malfunction.
The dishwasher does not wash properly
Indication: Dishes remain unwashed with streaks and greasy plaque.
Cause: The drain pump filter is defective.
The dishwasher does not heat up
Indication: The dishwasher leaks from under the door during the washing process, while the door does not close properly or does not lock in the open position (falls down).
Cause: the hatch lock device malfunction.
The dishwasher indicator is flashing
Indication: The indicators on the front unit are lit, the machine does not respond to commands, the program does not start.
Cause: the front panel malfunction.
The dishwasher does not dry
Indication: After working out the program, the dishes and the inside of the machine remain wet.
Cause: the drying fan motor malfunction.
The dishwasher does not wash the dishes properly
Indication: After work, the dishes remain dirty: leftovers, greasy stains, unwashed parts.
Cause: the dispenser malfunction.
The dishwasher does not wash the Causes
Indication: The program is working out, after which the dishes remain dirty.
Cause: the filling hose malfunction.
The dishwasher won't close
Indication: The door does not close properly, does not fit snugly, the door may be skewed.
Cause: the hatch mounting malfunction.
The gas stove is smoking
Indication: The dishes are smoking heavily on a certain burner.
Cause: Malfunction of the divider.
The oven in the gas stove does not work
Indication: The flame in the oven goes out immediately after releasing the handle.
Cause: Malfunction of the thermocouple.
The gas stove makes clicking noise
Indication: The button mechanism is worn out, the handle is jammed in the switched-on state.
Cause: Malfunction of the burner tap.
The gas stove goes out
Indication: The burner has started to go out, the fire is burning, but the reason is not fixed.
Cause: A malfunction of the thermocouple.
The gas stove goes out
Indication: Not all burners light up during operation, there is no spark.
Cause: Malfunction of the central auto-ignition unit.
The burner on the gas stove does not work
Indication: The flame lights up only on one side, when you release the handle, the flame goes out.
Reason: Burner malfunction.
The oven does not bake
Indication: Dishes are being cooked uneven oven low temperature.
Cause: Oven door malfunction.
The burner on the gas stove is not lit
Indication: Not all burners light up during operation.
Cause: Malfunction of the ceramic spark gap.
The electric ignition on the gas stove does not click
Indication: Ignition does not work on two burners - left or right.
Cause: Malfunction of the central auto-ignition unit is defective.
The electric ignition clicks
Indication: The ignition clicks constantly and does not turn off.
Reason: Malfunction of the auto-ignition button on the burner faucet.
The oven in the gas stove goes out
Indication: The oven goes out a couple of minutes after closing the door due to lack of oxygen.
Cause: Seal malfunction.
The gas in the gas stove does not burn
Indication: The oven is not heating, the gas is burning weakly, the bottom is burning.
Cause: Malfunction of the gas control.
FAQ
Another common breakdown is the failure of the heating element. How to define it? The machine stucks at the initial stage of washing. The water simply does not heat up. The system perceives this as a failure and the cycle does not start.
The problem may lie in the drain mode malfunction: a blockage or a broken bolt. In this case, the shutdown will occur before the spin. Contact the service center for a complete diagnosis.
The reason can be in the impeller. The impeller is an element which makes the rocker arm with sprinklers rotate. If this part does not work well, then the water is distributed unevenly, and the dishes are not washed.
The most common cause of this failure is a rupture of the drive belt or wear of the rotating axis or bearings. If the dryer has been used for a long time, it may be due to a breakdown of the electric motor. In any case, contact the technical service for the damaged elements replacement.
Pay attention to the serviceability of the spark plug of the gas stove and the solenoid valve. Work on the elimination of such malfunctions must be performed by a qualified specialist.